200C high temperature dust-free class 1000 cleanroom hot air oven
Cleanroom hot air oven is widely used to test materials performance
in high temperature environmental test condition, to provide a
uniform heat transfer, temperature control, high
precision,long-life precision oven. The temperature range is RT~300
C, adjustable. Other different type of oven, such vacuum drying
oven, dust-proof oven, nitrogen drying oven is available for us.
1. PID control system, double side overheating protection, safe and
2. Attached with two sets of movable desired to be adjusted high
and low at your display.
3. Automatic temperature controls, easy to set and operate.
4. Unique design of heat ex-changer for improved heat transfer
5. Heated with air circulating fan with heater.
6. Temperature controlled by Digital Temperature Indicator and
7. Transparent viewing window to see the samples.
8. Push type door locking system.
|Inner chamber size W×H×D(CM)||40×45×40||60×90×50||80×100×60||100×100×60||120×100×60|
|Exterior chamber size W×H×D(CM)||90×105×55||110×160×65||130×170×75||150×170×75||170×170×75|
|Dustproof class||Class 100,class 1000|
|Heat up time||30min|
|Material||Exterior chamber material||Cold-rolled steel with powder coating|
|Interior chamber material||SUS#304 Stainless steel plate(Use SUS#201 when max. temp. is below
|Insulation material||PU & fiberglass|
|System||Wind circulation||Cooling fan|
|Heating system||SUS#Stainless steel high-speed heater|
|Controller||CAHO H961KV02 controller(Taiwan)|
|Other components||Cable port(dia.50mm),control status indicator,loading
|Safety device||Over-heat protection circuit breaker,overload protection,overload
|Power supply||AC 3Y 380V 60/50Hz|
|Customization service||Non-standard or special requirements are all welcome|
1. Can I visit Yuanyao factory? Can your factory arrange
transportation for me?
It is a great honor to invite you to visit Yuanyao factory. We can
arrange our driver
to pick you up from your hotel when you arrived in Guangzhou City.
2. Can your factory print our brand on the product?
Our factory can laser print customer’s logo on the product with the
permission from customers.
Customers need to provide us a logo usage authorization letter to
allow us to print customer’s logo on the products.
3 . Does your factory have the design and development capabilities,
we need the customized
The staffs in our R&D department are well experienced in the
Climate testing industry, with more than 5
years experience. We can make customized products especially for
you; please kindly contact us for more details.
If you are interested in our products, please contact us for
further information without hesitation.