IEC-60529 Standard Photovotaic panel IP66 Walk-in Dust Test Chamber
Dust test chamber is maily used to test control cabinet, household
appliances, low voltage elec- tric appliance, automobile, lamps and
lanterns, motorcycle parts, ect outer shells.The whole syst -em is
designed to be used under extreme conditions and guarantees
reliable functioning and a long service life. Independent of design
and condition of the test specimen a constant dust density is
reached due to special high-capacity compressed air nozzles, which
leads to reliable test results.
1, Temperature: 5~35'C; Relative humidity: 45%~85%RH;
2, Without strong vibration and Electromagnetic effect around;
3, Test chamber should be stable placed and keep balance;
4, Installation place should keep good ventilation, without strong
airflow, high dust and corrosive material.
|Inner chamber size W×H×D(cm)||100×100×100||100×100×100|
|Exterior chamber size W×H×D(cm)||150×190×140||150×190×140|
|Dust concentration mg/m3||>60000||>3000||>100||>5000||>100|
|Testing temperature range||Room Temperature ~ ±50℃|
|Flow rate of dust (m/s)||Not specified||5m/s||10m/s|
|Test time||Swirl time||5s or other||no|
|Rest time||15min or other|
|Power supply||AC 1 phase 220V;3phase 380V 60/50Hz|
CHS D3069,IEC 60529,GB4208-93, GB2423.37-89 and GJB150.12,etc
1. Inner chamber material is SUS#304 stainless steel.
2. Using large transparent acrylic window, convenient and direct
observation internal testing conditions.
3. Adopt imported touch screen programmable controller, can control
dust blowing motor, dust vibration and test time.
4. Equipped with gastight chamber door, with lock device and glass
observation window.There is lamp and dust brush to ensure easy
observation of inner chamber.
5. With strong dust blowing device and vibrator to ensure
uniformity of each blowing.
6. Large diameter strong stainless steel air hose, covered with
heating device, can heat anddry the test chamber dust.
7. Imported high-precision electronic temperature humidity sensor
and air speed sensor.
Q:After an order is placed, when to deliver?
A:Generally about 15~20 days, If we have inventory, we can arrange
shipment within 3 days. Please be aware that our production lead
times depend on specific items and item quantities.
Q:What about the product' services and quality?
A:Each instruments must be carried out 100% quality examination and
test when shipping and delivery goods. Product use training, each
of our product provide video training to show you how to install
We can arrange engineer to train the operation of equipment to
customer’s company when you need.
Q:How to choose the most suitable products?
A: Our professional team will give you the best suggestion,when you
need some products to make the test,just be patiently to tell us
the information about your test sample,the parameters your
required.Our team may help you to find the best one.
Q:Can payment term be changed?